ESCO at ISE 2017

The Integrated Systems Europe (ISE) 2017 was held at RAI Amsterdam from 7 to 10 February earlier this month. The ISE was a resounding success, having received 73,413 registered attendees from 150 different countries and hosted 1,192 of the world’s leading AV equipment vendors and service suppliers. Exhibitors showcased solutions and products designed to meet the meets and demands of users.

Our ESCO team, with representatives from Singapore, Indonesia and India attended the ISE this year. Aside from networking and attending seminars and conferences, our team did their rounds and explored new products and solutions and here are some of the products/solutions that caught our attention.

Wolf Vision CYNAP

An all-in-one device that links up all types of devices such as Andriod, IOS, etc, and has an inbuilt recording function. Users can connect it to any touchscreen and utilize its whiteboard software features.

LUXi Presenter

A presenter device that allows you to connect multiple transmitter via CAT6 cable to multiple receivers which eliminate the need for a switcher.

Bose

PowerShare amps for users to control the amount of wattage sent to each channel, encouraging elimination of wastage.

Cisco Spark Board

A spark board with a fantastic touch response with the ability to mirror devices while supporting 2 way annotation to any device. This comes with 3 stylus and is easy to use and configure.

Crestron

The Crestron Mercury is an all-in-one device that supports any codec (Zoom, Vidyo, etc.). It is ideal for huddle rooms and smaller sized boardrooms.

ROE

LED screen with great resolution, offering curved or flat wall.

DS Solutions (Korea)

See through and mirror signage with creative applications.

AudiPack

Projection lift with mirror kit system & Ceiling suspended UFO ring speaker with 4 adjustable stainless wire.

RealTime Department (German)

Transparent display with videowall touchscreen capability & Interactive table football!

Canon

6000lumens 4k laser projector with ultra-wide, fisheye lens that create immersive 4k dome projection area.

Epson

Projectors that allow 360 degree installation flexibility with 15,000-25,000 lumens.

Samsung

Quantum-dot QLED Signage UHD Display (in 55’ and 65”), Stretched Display SHF Series (37”), Mirror display MLE Series (32” and 55”)


Aside from these technology sharing, our team shared their personal thoughts on the ISE:

Christopher Lim, General Manager of ESCO Singapore

What was the biggest highlight of the event?

I would say the Collaborative boards, AV over IP solutions and all-in-one meeting presentation devices were all the rage during ISE. You would really have to delve deep and study all these products to understand their specific strengths and shortcomings, which was really fun for me.

Is this your first ISE visit? Could you share with us about your experience? If not, how was this different in comparison to your previous visit?

This was only my second visit. Years ago, ISE was really a pure AV show but now you can see a lot of audio manufacturers who have their roots in the entertainment sector exhibiting. Indeed you also see the odd entertainment lighting booth! You can also see a change in their product lines which deviates from their traditional offerings. QSC are perhaps the best example of this.

Which particular booth captured your attention, why?

LG. Their booth was such a visual experience and they really proved a display is not just a display.

Vincent, Project Sales Manager of ESCO Indonesia

What was the biggest highlight of the event?

In my opinion, there were a few, such as AV over IP video distribution, 4K Laser Projectors, soft codec conferencing system, etc. All of which were most interesting and exciting.

Is this your first ISE visit? Could you share with us about your experience?

This is my first ISE visit which is a fruitful one, where I get to learn about the latest technologies and market trends in AV.

You can see that the product / solutions showcased such as projection mapping, immersive projection, curved display, interactive are aimed to improve customer experience and engagement. Also all-in-one solutions for BYOD which combine video conferencing, presentation, and other features were all very exciting.

Which particular booth captured your attention, why?

Epson, with their showcase on cool projection mapping on vertically mounted F1 car.

Leave a comment

Heald/Evo

The unique design of the Hostile Vehicle Mitigation (HVM) bollard means it can be installed at a depth only slightly greater than the height of the actual bollard itself with no loss of protection.

Technical Specification

Performance Rating
IWA14-1:2013 Bollard V/7200[N2A]/64/90:1.3

Bollard Diameter
273mm

Raised Height
1000mm

Power
415v/3 phase
230v/ Single phase
Or to suit country regulations

Options
EFO (Emergency Fast Operation)
LED lights available
Battery back up generator
Electro mechanical hydraulic operation

Normal Raise Speed
3-4 seconds approx

EFO Speed
1.5 seconds approx

Duty Cycle
100% rated

Finish
Galvanised then primed and painted black with red refl ective band. Alternative finishes and covers available on request.

Heald Matador HT3

Heald’s Electro Mechanical Matador is the latest addition to Heald’s product range. The EM Matador is an award-winning, sliding bollard system which is operated electro mechanically and has many additional benefits.

Technical Specification

Crash Testing
HT3: IWA 14-1:2013 Bollard V/7200[N3C]/64/90:1.3 (N3C 18 tonner vehicle)IWA 14-1:2013 Bollard V/7200[N2A]/80/90:4.8

Bollard Height
1100 mm

Bollard Diameter
273 mm

Foundation Depth
Surface mount (base requirements): 150 mm
Recessed:160 mm

Composition
Welding in accordance with BS 4872-1:1982.
Manufacturing in accordance with BS 6571.

Options
LED Lighting, Architectural Paving System, specialist cover options, Hydra Control and trace heating

Normal Operating Speed
6 seconds approx

Duty Cycle
100% rated

Motor
0.37 KWT (1 per dynamic bollard)

Finish
Base shot blasted and applied with special hard wearing resin
Top surface finished with anti-slip coating
Bollards galvanised with stainless steel covers

Heald/Raptor

Heald’s Raptor combines the high security of a roadblocker with the flexibility of a shallow mount bollard. The Raptor is the most resistant bollard of its type on the market due to its internal reinforcement which other bollards simply don’t have. Tested to both UK PAS 68 and US ASTM standards, not only will it halt a 7.5 tonne truck travelling at 80 kph it will also continue to function following the impact.

Technical Specification

Performance Rating
ASTM: M50-P1 Zero Penetration (SD-STD2.01 K12)
ASTM: C40 P1 Zero Penetration
PAS68 Blocker/Bollard V/7500[N3]/80/90:3.3/18.9

Axle Loadings
Will withstand any road going vehicle (In-house test certificate). Axle weight 120 tonnes or more.

Raised Height
985 mm

Width
380 mm

Composition
Profiled steel plate
Welding in accordance with BS 4872-1:1982
Manufacturing in accordance with BS 6571

Motor
Spec dependant on site requirements and may be altered after consultation with client. 3 kW motor.
Immersed pump (optional addition).
Extra Heavy duty solenoid valves (24 V DC) for reliability in operation.
Manual hand pump.
30 litre tank.

Power
415 V/3ph and neutral/50 Hz. Alternatively, power to suit customer requirements.

PLC Control Voltage
24 V DC

Options
Emergency Fast Operation (EFO) via accumulator
Hydra remote control and monitoring
Trace heating
LED lighting
High security lock out valve

Normal Raise Speed
4 - 6 seconds approx

EFO Speed
1.5 seconds approx

Duty Cycle
100% rated.

Finish
Galvanised then primed and painted grey or yellow, Chevrons available.Other colours available on request.

ATG/DEFENDER

The ATG Access Defender Automatic Bollard is a K4 impact tested bollard able to cope with a high number of operations per hour, making it ideal for sites with high traffic flow.

Technical Specification

Security Rating
US DOS - K4 Rating: 6,800 kg at 30 mph (48 kph)

Minimum Array
3

Power
External HPU

Diameter
273mm

Height Above Ground
762mm

Foundation Depth
1235mm

Finishes
Galvanised or painted yellow with the option of an aesthetic sleeve (279mm). Indirect red LED lights an option - check with technical team on application for a quotation.

Emergency Fast Operation (EFO)
Yes

SP400 Automatic Bollard

The SP400 Automatic Bollard is PAS 68 rated and available in a multitude of finishes and operation types making this product one of the most versatile high-security bollards on the market.

Technical Specification

Security Rating
PAS 68: V/7500(N2)/48/90:0/0
Security Rating
PAS 68: V/7500(N2)/64/90:2.3/2.7
Minimum Array
1
Power
External HPU
Diameter
240mm (lid), 209mm (core)
Height Above Ground
998mm
Foundation Depth
1528mm
Finishes
Sheradised black finish as standard, with or without two machine bands (client preference). Options include an aesthetic sleeve (219mm diameter) or direct LED (RGBW) lights. Product can be vinyl wrapped with a bespoke design or advertising copy.
Emergency Fast Operation (EFO)
Yes

SP400 Manually Retractable Bollard

The SP400 Manually Retractable Bollard offers an impact tested solution that can be easily operated without the need for electricity. 

Technical Specification

Security Rating
PAS 68: V/7500(N2)/48/90:0/0

Security Rating
PAS 68: V/7500(N2)/64/90:2.3/2.7

Minimum Array
1

Power
Integral HPU

Diameter
209mm (core)/ 240mm (lid)

Height Above Ground
998mm

Foundation Depth
1509mm

Finishes
Sheradised black finish as standard with two, yellow reflective bands. Product can be vinyl wrapped with a bespoke design or advertising copy.

SPTT Automatic Bollard

The SPTT Manually Retractable Bollard has a unique double retractable design which ensures smooth operation and acts as a depth saving feature. 

Technical Specification

Security Rating
PAS 68: V/7500(N2)64/90:0.5/6.1
Minimum Array
1
Power
External or Integral HPU
Diameter
209mm (top) / 280mm (bottom)
Height Above Ground
1000mm
Foundation Depth
900mm
Finishes
Sheradised black finish as standard. Option to sleeve with a stainless steel finish depending on application (210mm top, 282mm top diameter). Product can be vinyl wrapped with a bespoke design or advertising copy. A RAL finish is also possible on request.
Emergency Fast Operation (EFO)
No

SPTT Manually Retractable Bollard

The SPTT Manually Retractable Bollard has a unique double retractable design which ensures smooth operation and acts as a depth saving feature. 

Technical Specification

Security Rating
PAS 68: V/7500(N2)/64/90:0.5/6.1
Minimum Array
1
Power
Integral HPU
Diameter
209mm (top) / 280mm (bottom)
Height Above Ground
1000mm
Foundation Depth
900mm
Finishes
Sheradised black finish as standard. Option to sleeve with a stainless steel finish depending on application (210mm top, 282mm top diameter). Product can be vinyl wrapped with a bespoke design or advertising copy. A RAL finish is also possible on request.

ATG/Stealth

Tested to IWA 14-1, the Stealth Automatic Bollard is an automatic system with integral hydraulics that can be retrofitted into existing systems. 

Technical Specification

Security Rating
IWA 14: V/7200(N2A)/80/90:2.4 (Single Bollard)
Security Rating
IWA 14: V/7200(N2A)/80/90:0.8 (Dual Bollard)
Security Rating
PAS 68: V/7500(N2)/80/90:0.795/10.4 (Dual Bollard)
Minimum Array
1 (single bollard), 2 (dual bollard)
Power
External or Integral HPU
Diameter
230mm
Height Above Ground
1000mm
Foundation Depth
1514mm
Finishes
Sheradised black finish as standard with two yellow reflective bands. Option to fit with an aesthetic sleeve (240mm diameter) or direct LED (RGBW) lights - the external HPU model only. Product can be vinyl wrapped with a bespoke design or advertising copy.
Emergency Fast Operation (EFO)
Yes

ATG/SP MKII Titan Automatic Bollard

The Titan MK II Automatic Bollard is a cost-effective way of protecting key access points, available in a variety of operating sets and arrays. 

Technical Specification

Security Rating
PAS 68: V/7500/80/90:4.0/33.5
Security Rating
ASTM: M50 P2
Minimum Array
1
Power
External HPU
Diameter
273mm
Height Above Ground
1000mm
Foundation Depth
1684mm
Finishes
Galvanised and then painted as standard. Option to fit with an aesthetic sleeve (323mm diameter). Direct LED (RGBW) lights are also available for the unsleeved variant.
Emergency Fast Operation (EFO)
Yes

ATG/SP MKII Titan Manually Retractable Bollard

The Titan MK II is a manually retractable bollard impact tested to the British BSI PAS 68 standard.

Technical Specification

Security Rating
PAS 68: V/7500/80/90:4.0/33.5
Minimum Array
1
Power
Integral HPU
Diameter
273mm
Height Above Ground
1000mm
Foundation Depth
1684mm
Finishes
Galvanised and then painted as standard. Option to fit with an aesthetic sleeve (323mm diameter).

ATG/SP1000 Automatic Bollard

The SP1000 Automatic Bollard is the first ATG Access high-security bollard to be impact tested as part of the PAS 68 testing program, becoming one of the strongest automatic bollards available in the security market.

Technical Specification

Security Rating
PAS 68: V/7500(N2)80/90:0/10
Security Rating
ASTM: M50 P1
Minimum Array
1
Power
External HPU
Diameter
300mm
Height Above Ground
1000mm
Foundation Depth
1933mm
Finishes
Galvanised as standard with two yellow reflective bands. Can be fitted with either a black or stainless steel aesthetic sleeve (350mm diameter).
Emergency Fast Operation (EFO)
No

ATG/SP1200 Automatic Bollard

The SP1200 Automatic Bollard is the world's strongest impact tested bollard, and the only one tested with a 30,000kg vehicle.

Technical Specification

Security Rating
PAS 68: 30,000(N3)/80/90:3.30/25
Minimum Array
1
Diameter
300mm
Height Above Ground
1200mm
Foundation Depth
2040mm
Power
External HPU
Finishes
Galvanised as standard with two yellow reflective bands. For any alternative finishes, please discuss with our technical team on application for a quotation.
Emergency Fast Operation (EFO)
No

Here at ESCO, we like to keep in touch with our customers. If you need to talk, we're ready to listen.

Talk to us

    By clicking Send, you agree to our Terms and that you have read our Data Use Policy.


    Here at ESCO, we like to keep in touch with our customers. If you need to talk, we're ready to listen.

    Talk to us

      By clicking Send, you agree to our Terms and that you have read our Data Use Policy.